New Equipment - Laminators

The ALM3220 is a breakthrough in laminating technology. Laminating has never been so fast and easy. Fujipla's revolutionary compact auto laminator is as easy to use as a copy machine and warms up in 5 minutes. Just load from 1 to 200 documents in the automatic feeder and press the start button.  Each document is automatically fed into the laminator, laminated with the special lamination film, trimmed to size and then stacked on the collection tray. The ALM3220 can adjust to different size documents up to 12" x 18" and can adjusted to trim with or without a margin. The special AL laminating film comes in 1.5, 3 or 5 mil thickness in gloss or matte finish.

• Automatic Feeder
• Automatic Lamination
• Automatic Trimming
• Automatic Stacking

Table top - Short Run

• Compact desktop single-side laminator
• Fully automatic – feed, laminate, and separate with minimal operator involvement
• Perfect for short-run, on-demand, single-side lamination of printed sheets
• The feeder holds up to 25 sheets. Since sheets feed from bottom of stack, additional sheets can be added as machine runs
• A unique separator system ensures sheet separation with consistency
• Uses standard 110V power
• A rolling cart is available
• A.S.A.P. laminating films ensure adhesion to various types of print including toner-based digital prints
• Handles sheet widths as narrow as 103/4" – maximum sheet width of 133/4"
• Handles sheet lengths as short as 113/4" – maximum length of 195/8". Perfect for 11x17", 12x18", and 13x19" standard sizes

A revolutionary breakthrough in lamination technology…

• Mid-Range One-Side Laminator
• Fully automatic – feed, laminate, and separate with minimal operator involvement
• Perfect system for moderate volume and finishing of digitally printed sheets
• Speeds up to 10 feet per minute
• Sheet widths up to 14"
• Sheet lengths up to 20"
• Perfect for standard digital sheet sizes of 11x17", 12x18", 13x19", 14x20"
• The feeder holds up to 300 sheets
• The separator system is a flying knife allowing use of both OPP and Nylon-based laminating films
• Built-in de-curling device allows creation of perfectly flat one-side laminated sheets – even negative direction curl can be created

Dry-Lam is taking lamination of On-Demand Digital Prints to a new level. With the Fujipla PLUSTER , single sided laminating of Digital Prints has never been easier! The PLUSTER will automatically feed and laminate Digital Prints virtually unattended, freeing you to work on other profitable tasks. When coupled with our ASAP film, the PLUSTER becomes an instant profit-generator for you! Get this amazing machine only from Dry-Lam, America's Leader in Digital On-Demand and Wide Format Printing Lamination.

• Perfect for digital print on demand
• Small size – easy to use
• 120 Volt, 1400W service with economy mode
• Ultra quick warm up of less than 5 minutes
• Virtually Unattended Operation
• Automatically feeds up to 750-900 sheets
• Automatic one side lamination
• Digital Sheet sizes: Max 13 - 3/4" x 19 - 5/8" Min 11 - 13/16" x 17 - 5/8"
• Laminates copy paper or as heavy as 130# cover stock