New Equipment - Creasers, Perforators and Slitters
Graphic Whizard Creasing Equipment
Graphic Whizard PT330 SA & S Semi-Automatic Creasers
The Graphic Whizard PT330 SA semi-automatic creaser is economical and ideal for short run jobs. Setup is programmed by a simple touchscreen computer. The machine can store up to 49 different jobs. Program up to 16 creases and optional rotary perforate sheets up to 13" x 35" (33 cm x 88 cm). Crease up to 1,800 sheets per hour. The PT330 S is even more economical since it uses a simple display, rather than a touch screen.
Graphic Whizard CreaseMaster Plus
The CreaseMaster Plus is an impact die scoring machine that effectively eliminates substrate cracking experienced with rotary scoring. The CreaseMaster Plus is microprocessor controlled, making it easy to set up and program. The machine has the ability to hold a maximum of 20 jobs with 10 creases. It is the only machine on the market that can crease both inverted and regular scores in one pass. There is no need to worry about static or curl, just flip the sheet and score up or down. The bottom fed air feeder allows for the easy feeding of specialty stocks. Impact score, Rotary score, Perforate, Strike perforate, or Impact perforate for T-Slots. Produce up to 4,600 sheets per hour with the CreaseMaster Plus.
Graphic Whizard CreaseMaster Platinum
The CreaseMaster Platinum is an impact die scoring machine that effectively eliminates substrate cracking experienced with rotary scoring. The CreaseMaster Platinum is microprocessor controlled, making it easy to set up and program. With the software upgrade that is now included, the machine has the ability to hold a maximum of 20 jobs with 10 creases. It is the only machine on the market that can crease both inverted and regular scores in one pass. There is no need to worry about static or curl, just flip the sheet and score up or down. The bottom fed air feeder allows for the easy feeding of specialty stocks.
Impact score, perforate, Rotary score, perforate or Strike perforate up to 8,000 sheets per hour with the Creasemaster Platinum.
Graphic Whizard PT 370A Automatic Creaser And PT 370IKF Independent Knife Folder
The combination of the PT 370A automatic creaser and PT 370IKF independent knife folder increases your production level for creasing and folding in one solution. Touchscreen controls for both creasing and folding make job setup a breeze.
Integrated automatic sheet length measurement further simplifies job setup. Program up to 50 jobs into long-term storage for quick make-readies. Process up to a 350 gsm sheet and up to a 14.5" x 25.5" / 36.8 cm x 64.75 cm (39" / 99.1cm handfed) long sheet. You can bypass the knife folder for creasing only. Rotary perforation is optional.
The PT 370IKF independent knife folder can be purchased separately to run in-line with any creasing machine.
Speed: 3250 sph
Crease only 3250 sph
Maximum Stock Size: 14.5” x 25.5” 36.8cm x 64.75cm
Minimum Stock Size: 4.75” x 3.25” 12.06cm x 8.25cm
Stock Weight: 26# bond - 16 pt
Maximum Creasing Positions: 16
Program Memory: 50
Rosback 220 Trueline Perforator
The Rosback Model 220 20" Trueline is an excellent entry level high speed vacuum feed perforator, scorer, slitting machine. Its compact design has a variable speed control and is capable of handling sheets sizes from 3 x 3" (7.6 X 7.6 mm) to 20 x 23" (50 X 58 cm). It is equipped with a floor stand, two pair of perforator heads, one pair of scoring heads, eight assorted slitter blades and an adjustable delivery table. A double shaft unit is available for very close center to center distances. Both wider and smaller models are available as well as less expensive friction feed models.
Rosback 240 XL Perforator
The high speed Rosback Model 240XL Perforator/Scorer/Slitter is state of the art. This versatile machine is capable of producing intricate patterns at speeds up to 24,000 ft/hr. It maintains 100% accurate registration with sheet deflectors and a micrometer dial to make angular adjustments to compensate for sheet size inaccuracies. Its rugged frame is equipped with a 30" x 30" (76 X 76 cm) vacuum pile feeder, an operator interface control station, easy-out shafts, double sheet detector, and batch counting. A right angle section is available. A double shaft unit is available for really close center to center distances. Strike perforation/scoring/slitting is possible with the addition of the Cobra Strike Head Package.
Rosback Cobra Heads
The Rosback Cobra 4x4 allows for strike perforating, slitting and scoring. The slitting feature is more accurate than using a paper cutter. Individual electronic control of each Cobra Strike Head allows a multitude of strike patterns with surface speeds up to 24,000 ft/hr (9,000 meters per hour). It is an accessory for models 240XL, 243XL double shaft unit, 248 right angle unit, the 223SRX & 226SRX Truelines.
Graphic Whizard PT-SCC Slitter, Cutter, Creaser
The Graphic Whizard PT SCC is a highly accurate, low cost, easy to use multi-functional finishing device that can slit, cut, crease & fold, all controlled by a color touch screen.
The SCC produces a wide variety of professional quality, full-bleed applications such as business cards, greeting cards, invitations, brochures, pamphlets, catalogs, posters, book/CD covers, photographs, and more.
Capable of performing 6 slits, up to 32 cuts, and 32 creases per sheet, this powerful digital finishing system features the ability to manage heavier substrates up to 350gsm and larger sheet sizes, faster processing speed, and a rigid structure.
Up to 6 slits, 32 cuts, & 32 creases in 1 pass
Processing speed up to 25 sheets per minute
Barcode reader for jobs set up (option)
Bar Creaser Technology for Crease without cracking
Fully automatic setup once values are feed
Compact design with small footprint
99 Memory for storing repeat jobs
Adjustable crease depth
Ultrasonic Paper jam detector
Large Color Touch screen control
Perforate a sheet’s full length in both directions in one pass
MBM Aerocut Automatic Slitter and Creaser
The Aerocut air feed slitter/creaser provides the ideal finishing solution for digital applications, offering the perfect combination of high speed production, easy set-up, and laser-sharp accuracy.
With Aerocut by MBM, full-bleed documents including brochures, business cards, post cards, greeting cards, CD jackets and more can be creased ban trimmed in one easy operation. The high performance air feed system eliminates marking and double feeds while providing whisper-quiet operation. A wide range of stocks including gloss, laminated, and UV coated can be creased without cracking, even with full-bleed ink coverage. A handy on-line perforating unit easily snaps into place to provide even more versatility.
The easy-to-use digital touch screen control panel features addition and preset cutting modes and comes pre-programmed with 83 cutting templates. In addition, up to 50 additional custom programs can be entered and stored in memory.
What truly sets the Aerocut apart from the competition is it's unmatched precision. The vacuum belt and air knife feed system smoothly transports paper to the self-adjusting rollers. The rollers work in conjunction with the cut mark registration feature to maintain pinpoint accuracy throughout the run. Crease depth is easily adjusted using a 5-position dial located on the front of the machine. Easy-access rollers and self-sharpening blades mean minimum maintenance and less down time. Slit, crease and cut sheets from 8 ¼" x 8 ¼" x 14 3/8" x ∞.
If you're ready to streamline your digital print finishing and blow the competition away – fly Aerocut.
SunraiseSuper 12 SGC Business Card Slitter
The Sunraise 12SGC High Production Business Card Slitter is the most user friendly card slitter available. This unit will produce 36,000 twelve up sheets totaling 144,000 cards per hour. It has a shingled delivery for the cards on individual card conveyors. The slitter heads are mounted to a removable cassette for ease of changeover or replacement for sharpening. The machine can bleed trim in both directions.